DEUTZ Power Solutions Open Frame Genset 50 HZ / 60 HZ

Base Frame with Integrated Fuel Tank

The DPS OG series is equipped with a T-base frame with strong support feet to facilitate forklift handling and stabilizing the unit on uneven ground.

The support feet have holes to permanently fasten the generating set on site. Also includes fuel and lubricant-resistant, rubber anti-vibration mountings and battery supports.

Tough, Reliable, & Efficient DEUTZ Engine

Mechanical injection system with individual pump-line-injector system (only 2013 with common rail). Over 65 kVA electronic governor as standard and below that as an option. Excellent load response (G2 up to 180 kVA and G3 over it). Operation with fuels with 500 ppm sulphur content is allowed. Over 1000 ppm possible with some precautions. Durable design in main components.

Fuel Savings & Low Operative Costs

Standard 500-hrs maintenance interval. Up to 1000 hrs for sub 65 kVA as option. Optimized for fuel consumption.

Paying Attention to Detail

Filler cap, fuel gauge, draining caps and sleeves to connect to any accessories.

Durability

DEUTZ is renowned for its durability, and these stringent standards apply to all design aspects of DPS gensets. High-quality, powder-coated painting ensures an enduring appearance over long periods.

Control Panel

The OG range control panel features:

• On/Off key
• Emergency stop button
• Control module DEEP SEA® 4520 MKII
• Primary brand circuit breakers

DEEP SEA® 4520 MKII

DSE4520 is a compact Auto Mains (Utility) Failure Control Module. Monitoring an extensive number of engine parameters, the module displays warning, shut-down and engine status information on the LCD screen.

Rating Definitions

Prime Power Rating (PRP)

These ratings are applicable for supplying continuous electrical power(at variable load) in lieu of commercially purchased power. Operating at a max mean load factor at 80% of nominal power. There is no limitation on the annual hours of operation. DPS gensets deliver up to 10% overload power for one hour on a 12 hour period.

Standby Power Rating (LTP)

These ratings are applicable for supplying continuous electrical power(at variable load) in the event of utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous rated (as defined in ISO 8528-3). Max operating hours 500 a year.

Standard Reference Conditions

Standard reference conditions include a 25°C(77°F) air inlet temp, 100m (328 ft) A.S.L. 30% humidity. Ratings in accordance with ISO 8528. Power factor cos φ 0.8. For de-rating factors depending on altitude and temperature please contact your DEUTZ® partner (for example TCD 2013 does not de-rate up to 40°C and 1500 m A.S.L).

Warranty

All equipment carries the DEUTZ standard manufacturer’s warranty.

For details on warranty coverage, please contact your responsible sales partner or visit our website: www.deutzamericas.com